Water filter for calx and iron removal ROOS/AMS-CI

1. Vandens filtro paskirtis.

Water filter ROOS/AMS-CI is automatically regenerating water filter which serves purpose to remove excess iron, manganese, ammonium, turbidity (permanganate index) and hardness (limestones) from the water. The accumulated impurities in the filter media are removed periodically (the frequency depends on the actual water consumption) into the drainage system (sewer) during the regeneration of the filter. The water filter salt (NaCl) is used to restore the capacity of treated water supply. For more information on the operation of automatically regenerating ion exchange filters, see here.

2. Usage

Water filter against lime and iron ROOS/AMS-CI works by Single operating mode. This water filter is required when high water hardness, elevated levels of iron, manganese, ammonium and/or a visible, unwanted water colour are found in the water. The unit can be used in apartments, cafes, cottages, private homes and anywhere else where the monthly water consumption is between 3-25m³*. These filters are used to protect water heating equipment (boilers), sanitary equipment, household appliances (dishwashers, washing machines, water heating equipment), etc. and to improve the quality of the used water.

3. Equipment set-up

3.1 The filter is equipped with the most complete automatic control valve "Clack Corporation", USA, WS1CIwhich performs filter regenerations based on actual water consumption. The operating principle, structure, adjustment and setting are given in the Instruction Manual.

3.2 The 'base' of the filtration equipment is pressurised housings made of reinforced polyacrylic. The products meet all of the hygiene, safety and technological requirements.

3.3 Filter media: a blend of 5 filter medias with universal and unique properties and functions.

3.4. Separate container for salt Clack Corporation, USA, which size is 100 litres. Its purpose is to "prepare" salt brine for regeneration process. The container is fully equipped (salt suction, water filling, overflow protection mechanisms and connections).

3.5 The unit includes 25 kg of crushed salt Regesal (NaCl.) for the preparation of the regeneration solution.

3.6 Optionally available with a untreated water valve (By-Pass valve), “Clack Corporation”, JAV

4. Installation of the filter.

The installation work shall be carried out in accordance with the requirements of the "INSTRUCTIONS FOR INSTALLATION, SETUP, COMMISSIONING AND WARRANTY SERVICE OF AUTOMATIC FOG FILTERS", which is supplied with the equipment.

5. General specifications.

Technical details
Model	CI08	CI10	CI12	CI13
Suitability (number of persons)	2-4	2-5	4-7	4-9
Price (€)	999	1100	1256	1400
Filter suitability in terms of water used per month*	3-15	4-25	6-30	8-35
Filter dimensions (Width x Depth x Height cm.)	32x52x70	32x52x112	32x52x112	32x52x112
Ammount of filtration media in liters	25	37	50	62
Maintenance costs (salt refill) per months	4-12	4-12	4-12	4-12
Maintenance	No maintenance required	No maintenance required	No maintenance required	No maintenance required
Capacity (m³/h)	1	1,2	1,3	1,5
Maximum (temporary) water filter capacity (m³/h)	1,8	2,0	2,2	2,5
Manufacturer's recommendation for filters media replacement (in years)	3-5	3-5	3-5	3-5
Connection diameter (mm.)	25	25	25	25
Operating pressure range (bar)	1,4-8,0	1,4-8,0	1,4-8,0	1,4-8,0
Operating temperature range (ºC)	2-40	2-40	2-40	2-40
Salt brine capacity (liters)	75	100	100	100
Water consumption during regeneration (liters) **	90-250	80-120	100-160	120-180
Time of regenerations (min).**	60-80	60-80	70-90	120-180
Warranty period (months)***	36	36	36	36

*Note: The recommended filter suitability is based on Total Hardness of 6-7 mg-eq/liter or 3-3.5 mmol/liter.

**The parameters are given in averages and vary depending on the degree of contamination of the water and filter itself, as well as the specifics of each object.

***Warranty covers the whole unit, without distinction to individual electrical, mechanical or other assemblies and parts.