Compressor for iron removal filters AS18W (with relay)

The compressor for deironing water filters AS18W (with relay) is an essential device to ensure efficient and long-lasting iron removal systems work. In order for two column iron removal filter to work, the first column must contain oxygen. If there is no air, the second column does not work, which means that the water is not filtered from iron, manganese and other contaminants. This is why the compressor is one of the key elements in two-column iron removal filters.The air compressor for the provides right ammount of air to the oxidation column of the iron removal filter to allow the reaction between air and water to take place, so you can be sure that your water supply system will run smoothly and without any glitches.

Why is the AS18W compressor (with relay) for deironing filters is better than a simple timer-controlled compressor?:

1. The compressor plugs into a socket and the two wires coming out of the compressor connect directly to the water filter control valve. A valve that counts the amount of water flowing through the filter, gives the compressor an impulse to switch on and operate for a pre-programmed period of time. This is a more advanced method than a compressor connected via a timer, as the timer can fail and, in many cases, as a result the compressor burns. When the compressor runs on pulses, this problem no longer exists.
2. The compressor is triggered by water flow rates. It means that air will be blown in while water is being used in the home. This makes it easier for the compressor to fill the oxidation column with air. When compressor is connected via time-controlled unit the device starts working always on the same time and water may not be used at that time. As a result, the weaker compressor may not be able to fill the column with air because of pressure in the system.