Reverse osmosis RO-400-7 stages direct flow

1. About the filter

Reverse osmosis water system with a capacity of up to 1.05 l/min. Drinking water system RO-400-7 direct flow serves the purpose of producing the highest quality drinking water by reverse osmosis technology (for more information on reverse osmosis see. here).

2. Usage

This water purification systems can be used in apartments, cottages, private houses, etc. The quality of the water entering the reverse osmosis system must meet the minimum water quality requirements (see below)

3. Equipment set-up

The reverse osmosis system RO-400-7 direct flow uses:

First stage

5 Microns mechanical cleaning cartridge filter FCPS5. The function of this filter is to trap mechanical particles (sand, gravel, dirt, rust, etc.) that are larger than 5 microns.

Second stage

Carbon cartridge filter FCCBL. The purpose of this filtration stage is to clear chlorine, organic compounds and microorganisms from the water.

Third stage

1 Micron mechanical cleaning cartridge filter  FCPS1. The function of this filter is to trap mechanical particles (sand, gravel, dirt, rust, etc.) that are smaller than 5 microns but larger than 1micron.

Fourth stage

Membrane. This is the main stage of a filtration in any reverse osmosis system. The key difference of this reverse osmosis system is the high performance membrane which capacity is up to 1,05 l/min. The model name is 400GPD.

Fifth stage

Cartridge filter element of activated carbon AICRO. It is installed between the membrane and the mineral granules filter element.

Sixth stage

Cartridge mineral granule filter element AIMRO. It is placed between the activated carbon granule filter element and the bioenergy element to precisely complete the treatment of drinking water by enriching it with minerals.

Seventh stage

Cartridge filter AIFIR200 is designed to alkalinise drinking water and enrich it with minerals. It is placed between the mineral AIMRO cartridge and the tap in order to give the water a low oxidation-reduction potential ORP (-100mV) and to increase the PH level.

4. Installation of the filter.

Installation is carried out by a qualified technician or on your own in accordance with the requirements of the "INSTRUCTIONS FOR USE" supplied with the equipment.

5. Terms of use: