RO-14M 6-stages reverse osmosis filter with pressure boost pump

1. About the filter

Reverse osmoso filtrai ir RO-14MB paskirtis – paruošti aukštos kokybės geriamą vandenį atbulinio osmoso metodu (plačiau apie atbulinio osmoso veikimą žr. here). The filtration system can produce up to 279 l/day clear water. Due to the low water production, an additional tank is built next to reverse osmosis, which fills up while the tap is not opened and nobody uses water.

2. Usage

This water purification systems can be used in apartments, cottages, private houses, etc. The quality of the water entering the reverse osmosis system must meet the minimum water quality requirements (see below)

3. Equipment set-up

The RO-14MB seven-stage reverse osmosis filter uses:

First stage

5 Microns mechanical cleaning cartridge filter FCPS5. The function of this filter is to trap mechanical particles (sand, gravel, dirt, rust, etc.) that are larger than 5 microns.

Second stage

Carbon cartridge filter FCCBL. The function of the filter is to protect the filter membrane and the water itself from chlorine, organic compounds and microorganisms.

Third stage

1 Micron mechanical cleaning cartridge filter FCPS1. The function of this filter is to trap mechanical particles (sand, gravel, dirt, rust, etc.) that are smaller than 5 microns but larger than 1micron.

Fourth stage

Membrane. This is the main stage of a filtration system. The reverse osmosis membrane has a capacity of up to 279 ltr/day. Model - Vontron ULP-75GPD.

Fifth stage

Cartridge filter element of activated carbon AICRO. It is placed between the membrane and the mineralisation cartridges to improve the taste of water.

Sixth stage

Cartridge mineral granule filter element AIMRO. It is installed between the activated carbon granule filter element and the drinking faucet to precisely complete the treatment of drinking water by enriching it with minerals.

4. Installation of the filter.

Installation is carried out by a qualified technician or on your own in accordance with the requirements of the "INSTRUCTIONS FOR USE" supplied with the equipment.

5. Operating conditions

 

Technical characteristics
Operating pressure range (bar)	1.0-8.0
Operating temperature range (ºC)	2-38
Minimum water quality requirements
PH range	3,0-11,0
Maximum salinity mg/ltr.	2000
Turbidity (by Formazin)	<0,1
Hardness mg. CaCO3 Mg-ekv/l.	<650 mg/l. <13,0
Iron (Fe), mg/ltr.	<1,0
Manganese (Mn), mg/l.	<0,1
Hydrogen sulphide (H2S) mg/l.	<0,03
Chlorine (CL2), mg/l.	<0,5
Level of water purification due to membrane filtration
Contamination type	Level of purification (%)
Mechanical impurities/ turbidity	>99
Inorganic substances
Natris	90-95
Calcium	93-98
Magnesium	93-98
Iron	93-98
Manganese	93-98
Copper	93-98
Nikelis	93-98
Zinc	93-98
Lead	93-98
Chlorides	90-95
Nitrates	80-90
Phosphates	93-98
Sulphates	93-98
Cyanides	90-95
Organic substances
Organic molecules weighing more than > 200	>99
Organic molecules weighing less than > 200	Iki 99
Change intervals for filter elements
Name of the filter element	Change intervals
Cartridge filter FCPS5	6 months
Cartridge filter FCCBL	6 months
Cartridge filter FCPS1	6 months
Cartridge carbon element Aimro	12 months
Cartridge mineralisation element Aimro	12 months
ULP-75 membrane	4-8 years